How To Install Dinse Connector

Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process

JoeM

• JoeM
• New Member
  

• Posts:

• Joined:

  Fri Mar 10, 2022 6:36 pm

I bought a CK 17 super flex torch and a Dinse 35 connector from CK for a Everlast 210EXT and the 35mm dinse is wrong. I bought the SL2-35 and it is different than the cease from everlast. Anyone know where i tin can be bought from and or the correct part number to order for my new torch. I cant post a moving-picture show of the connector. Too much of a noob to the forum

Cheers in advance,
Joe

• Posts:

• Joined:

  Sunday May 06, 2022 11:51 pm

• Location:

  Floriduh

Thu May 10, 2022 half-dozen:39 pm

The SL2-35 should fit. Is the actual connector likewise large or just the gas inlet fitting?

"Your welds should sound like bacon. If your welds aroma like bacon, you lot're on fire." - Uncle Bumblefuck (AvE)

JoeM

• JoeM
• New Member
  

• Posts:

• Joined:

  Friday Mar x, 2022 6:36 pm

Thu May 10, 2022 7:37 pm

The connector does get in the welder and does twist to lock. The everlast brass end is solid just the ck dinse has a pigsty thru it. I was enlightened of the gas end plumbing fixtures finish on ck is threaded and was going to machine a quick release fitting to adapt to the weld unit. I did notice the dinse on ck a 1/8 in longer. I away fro shop now so cant do any testing tonite

• Posts:

• Joined:

  Sun May 06, 2022 11:51 pm

• Location:

  Floriduh

Thu May 10, 2022 8:57 pm

Mine has a pigsty through it too. Equally long as it twists and locks it should work. Same torch and connector setup on my 250EX and it works.

I just pulled the quick disconnect off the stock torch and put it on the CK connector. I only have 1" contumely stock so I was as well lazy to auto a fitting.

"Your welds should sound like bacon. If your welds smell like bacon, you're on fire." - Uncle Bumblefuck (AvE)

JoeM

• JoeM
• New Member
  

• Posts:

• Joined:

  Fri Mar 10, 2022 6:36 pm

Thu May ten, 2022 ix:23 pm

Ok Cheers for the answer's guys. I thought the hole was going back to the hose line but I guess it is blocked of internally so gas only exit's out the torch.

Joe.

JoeM

• JoeM
• New Member
  

• Posts:

• Joined:

  Fri Mar 10, 2022 6:36 pm

Thu May x, 2022 ix:25 pm

I will check it out tomorrow and see if the 9mm quick release male person adapter comes off the economic system torch supplied with the unit.
Hope so if not I can at least copy it.
Joe

JoeM

• JoeM
• New Member
  

• Posts:

• Joined:

  Fri Mar ten, 2022 6:36 pm

Thu May x, 2022 9:53 pm

Is at that place a certain numbers of posts that take to be met by a affiche before we can post pictures? The up load icon is non showing upwardly when I post. I accept searched the How to use the forum and only encounter that a file size max of 256kb.
Joe

• Posts:

• Joined:

  Thu Sep 29, 2022 eight:59 am

Fri May 11, 2022 8:21 am

I'm non terribly familiar with your automobile, but, your gas fitting (Dinse connector) does not need a hole in it since yous have a divide gas fitting.
http://weldfabulous.com/welding/tig/con ... ory_page=ane

As for the length of the male Dinse, did you spin the collar loose enough to twist the male first? The collar tightens the connector after the twist-lock. I use a similar plumbing equipment on my Dynasty, and take purchased the SuperFlex cables for it and my Multimatic and both fit perfectly. They are listed every bit 35mm and 25mm Dinse respectively.

• Posts:

• Joined:

  Sunday May 06, 2022 11:51 pm

• Location:

  Floriduh

Fri May 11, 2022 i:08 pm

JoeM wrote:Is there a certain numbers of posts that have to be met by a poster before nosotros can mail service pictures? The up load icon is not showing up when I post. I have searched the How to apply the forum and only see that a file size max of 256kb.
Joe

I'm using the forums on my telephone and so information technology may be different, but it'due south at the bottom of the text input field.

Upload attachment tab, choose file then upload. Next to options.

I retrieve the pigsty is in the connector just for ease of machining. Why make 2 parts when one works for both.

"Your welds should sound like bacon. If your welds olfactory property similar bacon, you're on burn." - Uncle Bumblefuck (AvE)

• songer121
• New Member
  

• Posts:

• Joined:

  Fri May 11, 2022 3:36 pm

Fri May 11, 2022 three:41 pm

I will take some pictures of my ck 17 tonight and postal service them. Its got a hole on the stop to.

• songer121
• New Member
  

• Posts:

• Joined:

  Fri May 11, 2022 3:36 pm

Fri May xi, 2022 3:fifty pm

I will have some pictures of my torch when i become home. its a ck 17 and the dinse connector has hole on the cease equally well. Its no big deal as long as the connector with the gas hose on it is solid. i will evidence y'all what mine looks like and y'all can compare.

JoeM

• JoeM
• New Fellow member
  

• Posts:

• Joined:

  Fri Mar ten, 2022 half-dozen:36 pm

Sun May xiii, 2022 nine:07 pm

Attaching a picture of the economy torch cease and the CK end. The CK is around .125 longer and the lock pivot is located in a different location. The CK does lock in but is loose when fully inserted and turned. I did what cj737 posted and spun the plastic collar to lock it securely in the welder. Yet need to brand the 9mm quick connector earlier I can use the new 17 torch. Thanks for all the replys guys.
Joe

dinse connector2 JPG.JPG (52.67 KiB) Viewed 1994 times

• Posts:

• Joined:

  Thu Sep 29, 2022 8:59 am

Mon May 14, 2022 viii:38 am

Your SuperFlex Dinse is the wrong model. Simple equally that. Yous can swap the unit of measurement from your left hand to the SuperFlex and be done with it.

• Posts:

• Joined:

  Wed Jul 26, 2022 seven:00 pm

Mon May 14, 2022 ten:33 pm

Looks like you lot got an SL2-35M instead of an SL2-35. Look at this page http://www.ckworldwide.com/dinse-gas-cooled.html

I've got a 210EXT likewise, but I got my torches from Everlast. I did make up an extension for the ground and had no problem with the connectors for that.

David

Everlast 210 EXT
Lincoln AC225
Lotos LTP5000D
Oxy-Acetylene

• Posts:

• Joined:

  Sun May 06, 2022 11:51 pm

• Location:

  Floriduh

Mon May 14, 2022 10:41 pm

dgapilot wrote:Looks like you lot got an SL2-35M instead of an SL2-35. Look at this page http://www.ckworldwide.com/dinse-gas-cooled.html

I've got a 210EXT as well, simply I got my torches from Everlast. I did make upward an extension for the basis and had no problem with the connectors for that.

He said it's blocked off and has the external gas hose and so information technology's non that.

It's the same with mine. Mine snugs upwardly afterward well-nigh 270* of a turn.

Attachments

20180514_223909.jpg (48.half dozen KiB) Viewed 1973 times

"Your welds should audio like salary. If your welds smell like bacon, you're on fire." - Uncle Bumblefuck (AvE)

JoeM

• JoeM
• New Member
  

• Posts:

• Joined:

  Friday Mar x, 2022 six:36 pm

Mon May 14, 2022 eleven:48 pm

Hither is the tag on the connector I bought.

CK tag.JPG (91.ix KiB) Viewed 1969 times

JoeM

• JoeM
• New Fellow member
  

• Posts:

• Joined:

  Fri Mar x, 2022 half dozen:36 pm

Monday May 14, 2022 11:57 pm

Hither is the connectors with the shells off.

IMG_1414.JPG (80.88 KiB) Viewed 1966 times

JoeM

• JoeM
• New Member
  

• Posts:

• Joined:

  Fri Mar 10, 2022 6:36 pm

Tue May 15, 2022 12:00 am

The copper sleve in the Everlast looks to be bonded in. Or is it threaded, I don't desire to break information technology off as I wont have a torch to use.

IMG_1415.JPG (52.67 KiB) Viewed 1965 times

Forum will only let me post ane pic at a time.

Joe

• Posts:

• Joined:

  Thu Sep 10, 2022 8:45 pm

• Location:

  Iowa

Tue May 15, 2022 7:01 am

I highly doubtfulness it is threaded. I don't know for sure, but I've never seen one that'south threaded unless information technology has visible fittings or flats for a wrench.

I have more questions than answers

Josh

• songer121
• New Member
  

• Posts:

• Joined:

  Fri May 11, 2022 3:36 pm

Wednesday May 16, 2022 3:28 pm

cj737 wrote:Your SuperFlex Dinse is the wrong model. Simple as that. Yous can swap the unit from your left hand to the SuperFlex and be washed with information technology.

No it's not wrong..... as long every bit the connector under the dinse connector that connects to the cable is solid and not a flow through manner it will be fine. I know this because mine is the verbal same thing.

• songer121
• New Member
  

• Posts:

• Joined:

  Fri May 11, 2022 three:36 pm

Midweek May xvi, 2022 3:29 pm

yep thats all exactly how mine is. Ur good to go! Put it all back together and get weld something!

• songer121
• New Fellow member
  

• Posts:

• Joined:

  Fri May 11, 2022 3:36 pm

JoeM

• JoeM
• New Member
  

• Posts:

• Joined:

  Friday Mar ten, 2022 6:36 pm

Wednesday May xvi, 2022 11:26 pm

Thanks very much for taking the dime to verify my buy Songer121. My torch is fix upwardly now to practise some welding on Fri.
Thank you for all the help guys, looking forwards to using this keen torch.

Joe

Source: https://forum.weldingtipsandtricks.com/viewtopic.php?t=13303

Posted by: connertweat1943.blogspot.com

Share this post